Remote Beacon

Baliza estroboscópica YASONG con 4 modos de destello, bocina de 120 dB, 9 tonos, luces de emergencia LED con base magnética para vehículos, camiones, coches AC100V-AC240V SLA-190

$59.00 $69.99
0–120dB Adjustable 9 Alarm Tones 4 Flash Modes Remote Control IP65 Waterproof
Color
Tamaño
Product Size
Shipping estimate

Select a destination to view an estimated shipping range.

Get Product & Shipping Quote
Before You Buy

Please confirm the voltage, lampshade color and base type before ordering. This model is listed with AC100V–240V input, so vehicle power compatibility should be confirmed before installation.

Product Overview

  • Especificación del producto

  • Producto: Luces de emergencia para vehículos

  • Modelo: SLA-190

  • Tamaño: 4.3*4.3*5.3 (Unidad: pulgada)

  • Peso: 0.8 KG

  • Voltaje: AC100V-AC240V

  • Potencia: 15 Watts

  • Clasificación IP: IP65 impermeable y a prueba de polvo

  • Tono: 9 (Ajustable)

  • Volumen: 0-120 dB (Ajustable)

  • Modos de flash: Estroboscopio giratorio/Estroboscopio/Estroboscopio de alta frecuencia/Ciclo de flash izquierdo y derecho

  • Tipo de luz: LED

  • Color de la pantalla: Rojo/Amarillo/Verde/Azul

  • Instalación: Base magnética

  • Distancia del control remoto: 1-8 (metros)

  • Material: Pantalla: PC; Base: ABS

【Luz estroboscópica LED】Esta luz de emergencia es imprescindible para cualquier conductor, ya sea que esté en la carretera o fuera de ella. Cuenta con 72 perlas LED que proporcionan 360 grados de iluminación, haciéndola visible desde todos los ángulos.

【Cuatro modos de flash】La luz de baliza utiliza 72 perlas de lámpara LED con alto brillo. Hay cuatro modos de flash: parpadeo de alta frecuencia, parpadeo de baja frecuencia, parpadeo de rotación y parpadeo de izquierda a derecha, que se pueden ajustar con el control remoto.

【Bocina fuerte de 120 dB】El volumen de la luz de advertencia de emergencia es de hasta 120 dB, que se puede ajustar con el control remoto. Incorpora 9 tonos de alarma, el tono se puede ajustar con el control remoto. Se puede cargar audio personalizado a través del puerto Micro USB

【Material de las luces estroboscópicas】La pantalla de las luces intermitentes está hecha de material de PC con buena transmitancia de luz. La base está hecha de material ABS, con fuerte resistencia al impacto y buena resistencia al calor.

【Luz de coche impermeable】La luz intermitente para vehículos adopta un diseño de circuito IP65 a prueba de agua y polvo, y se puede usar en interiores y exteriores. Las luces de emergencia son ampliamente utilizadas para vehículos, montacargas, camiones, tractores, carritos de golf, UTV, automóviles y autobuses.


Key Specifications

Quickly compare the most important details before ordering.

Sound Level 0–120dB
Input Voltage AC100V–AC240V
Power 15W
Light Source 72 LED beads
Protection Rating IP65 waterproof and dustproof
Trigger Mode Wired power activation
Installation Method Magnet Base / Bolt Base, depending on selected variant
Typical Application Scenarios Workshops, factories, construction sites, security posts, lifting machinery, automation equipment, project vehicles, tank cars, warning posts, industrial equipment, emergency warning areas

Product Highlights

Key features that help you decide whether this model fits your use.

1

Beacon Light with Siren

The SLA-190 combines an LED beacon warning light with a 0–120dB adjustable siren. It is suitable for workshops, factories, construction sites and industrial warning areas.

2

9 Tones and Remote Control

The beacon siren includes 9 adjustable alarm tones. The tone, volume and flashing mode can be adjusted by remote control within about 1–8 meters.

3

Four Flashing Modes

The light supports rotating strobe, strobe, high-frequency strobe and left-right cycle flash modes. Users can select a suitable warning signal for different site conditions.

4

72 LED Bead Design

The product description states that the beacon uses 72 LED beads for 360-degree illumination. This helps improve visibility from different directions.

5

IP65 Outdoor Housing

The product page lists IP65 waterproof and dustproof protection. The PC lampshade and ABS base support indoor and outdoor warning use when installed correctly.

Full Product Specifications

Detailed specifications for installation, comparison and compatibility checks.

Product Type
LED Beacon Siren Light
Input Voltage
AC100V–AC240V
Power
15W
Sound Level
0–120dB
Tone
9 adjustable tones
Volume Adjustment
0–120dB, adjustable by remote control
Alarm Mode
Audible and visual alarm
Trigger Mode
Wired power activation
Control Mode
Remote control for volume, tone and flashing mode adjustment
Work Mode
LED flashing beacon with siren alarm after activation
Light Source
72 LED beads
Lighting Mode
Rotating strobe / Strobe / High Frequency strobe / Left flash right flash cycle
Protection Rating
IP65 waterproof and dustproof
Installation Method
Magnet Base / Bolt Base, depending on selected variant
Material
Lampshade: PC; Base: ABS
Net Weight
0.8KG
Remote Control Function
Adjust volume, tone and flashing mode
Remote Control Range
1–8m
USB Interface
Micro USB port for custom audio upload
Typical Application Scenarios
Workshops, factories, construction sites, security posts, lifting machinery, automation equipment, project vehicles, tank cars, warning posts, industrial equipment, emergency warning areas
Tips
Please confirm the voltage, lampshade color and base type before ordering. This model is listed with AC100V–240V input, so vehicle power compatibility should be confirmed before installation.
Customization
USB custom audio upload, lampshade color options, magnet base or bolt base options

Need help choosing the right model?

Tell us your voltage, installation location and how you want the alarm or warning light to work. We will help you check a suitable option before you order.