Beacon Light with Siren
The SLA-190 combines an LED beacon warning light with a 0–120dB adjustable siren. It is suitable for workshops, factories, construction sites and industrial warning areas.
Best for
AC-powered warning with remote adjustment
A good choice if you need
- Adjustable sound: 0–120dB
- Custom alarm audio upload
- Audible + visual warning
- IP65 waterproof and dustproof protected installation
How it works
- LED flashing beacon with siren alarm after activation
YASONG Alarm
AC Beacon Siren
YASONG SLA-190 120dB LED Beacon Siren Light, 9 Tones, 4 Flash Modes, AC100-240V, Remote Control
0–120dB
15W
IP65 waterproof and dustproof
Audible + visual warning
Best for
AC-powered warning with remote adjustment
A good choice if you need
- Adjustable sound: 0–120dB
- Custom alarm audio upload
- Audible + visual warning
- IP65 waterproof and dustproof protected installation
How it works
- LED flashing beacon with siren alarm after activation
$59.00
$69.99
Before You Buy
Please confirm the voltage, lampshade color and base type before ordering. This model is listed with AC100V–240V input, so vehicle power compatibility should be confirmed before installation.
Need another control method?
See other alarm options →
Is this model right for you?
Check the capabilities that matter before you choose a configuration.
If you need
This model
Adjustable volume
✓
Custom alarm audio
✓
Audible + visual warning
✓
IP65 waterproof and dustproof protection
✓
Why choose this model?
The features that most directly affect how this model works and where it fits.
9 Tones and Remote Control
The beacon siren includes 9 adjustable alarm tones. The tone, volume and flashing mode can be adjusted by remote control within about 1–8 meters.
Four Flashing Modes
The light supports rotating strobe, strobe, high-frequency strobe and left-right cycle flash modes. Users can select a suitable warning signal for different site conditions.
Key Specifications
Quick technical checks before ordering.
- Sound Level
- 0–120dB
- Power
- 15W
- Trigger Mode
- Wired power activation
- Control Mode
- Remote control for volume, tone and flashing mode adjustment
- Alarm Mode
- Audible and visual alarm
- Tone
- 9 adjustable tones
- Volume Adjustment
- 0–120dB, adjustable by remote control
- Protection Rating
- IP65 waterproof and dustproof
- Installation Method
- Magnet Base / Bolt Base, depending on selected variant
- Input Voltage
- AC100V–AC240V
Product Overview
The YASONG SLA-190 LED beacon siren light combines a 0–120dB adjustable horn, 9 built-in alarm tones and 4 flashing light modes for workshops, factories, construction sites, project vehicles, warning posts and industrial emergency areas.
This model uses an AC100V–240V wired power input. The remote controller can adjust the tone, volume and flashing mode within a short operating range.
- 0–120dB adjustable sound controlled by remote controller
- 9 built-in alarm tones for different warning needs
- 4 flashing modes including rotating, strobe and high-frequency flash
- 1–8m remote control range for short-distance adjustment
- IP65 waterproof and dustproof housing for indoor and outdoor warning use
Please confirm the voltage, lampshade color and base type before ordering. This model uses AC100V–240V input, so vehicle power compatibility should be confirmed before use.
Full Technical SpecificationsDetailed product data from the available product information.
- Product Type
- LED Beacon Siren Light
- Input Voltage
- AC100V–AC240V
- Power
- 15W
- Sound Level
- 0–120dB
- Tone
- 9 adjustable tones
- Volume Adjustment
- 0–120dB, adjustable by remote control
- Alarm Mode
- Audible and visual alarm
- Trigger Mode
- Wired power activation
- Control Mode
- Remote control for volume, tone and flashing mode adjustment
- Work Mode
- LED flashing beacon with siren alarm after activation
- Light Source
- 72 LED beads
- Lighting Mode
- Rotating strobe / Strobe / High Frequency strobe / Left flash right flash cycle
- Protection Rating
- IP65 waterproof and dustproof
- Installation Method
- Magnet Base / Bolt Base, depending on selected variant
- Material
- Lampshade: PC; Base: ABS
- Net Weight
- 0.8KG
- Remote Control Function
- Adjust volume, tone and flashing mode
- Remote Control Range
- 1–8m
- USB Interface
- Micro USB port for custom audio upload
- Application Scenarios
- Workshops, factories, construction sites, security posts, lifting machinery, automation equipment, project vehicles, tank cars, warning posts, industrial equipment, emergency warning areas
- Customization
- USB custom audio upload, lampshade color options, magnet base or bolt base options
Need a different alarm?
If this control method or feature set is not what you need, start with the requirement that matters most.
Need remote activation?
Explore sirens designed to trigger wirelessly from a distance.
Explore options →
Need simpler power-on warning?
Explore wired power-on sirens when advanced sound adjustment is unnecessary.
Explore options →
Connecting to a relay, sensor or controller?
Explore dry-contact and compatible signal-input alarm sirens.
Explore options →
Need help choosing?
Tell us your voltage, installation environment and preferred activation method. We can help you compare suitable options.
Customer Reviews
2.0 / 5 from 1 review
★
★
★
★
★
2.0 / 5
1 review
Verified customer feedback
1 / 19